Showing posts with label veil. Show all posts
Showing posts with label veil. Show all posts

Saturday, April 6, 2013

Fascinators!

Everyone loves a posh little fascinator. Since the WillKate wedding, they have been a huge fashion trend. And they are super easy, fun, and versatile! So here's a quick how-to, to get you started.

You will need:


  • Felt or fabric (a small scrap will do)
  • A stiffening agent (I've used spray starch, iron-on interfacing, etc)
  • A Needle and Thread (or glue)
  • A barrette or hair comb
  • Decorations (check out my instructions on how to make fancy feather decorations and some options if you want a veil.)

1. Cut your fabric into a small oval. If using interfacing, cut that to match, a half inch smaller than your fabric, and iron in the center.



2. Cut a slit to the center point of the fabric, where you want the back to be.



3. Overlap the edges of the slit about an inch (more for a stronger curve, less for a more subtle one). Sew the overlap in place.



4. If using spray starch, spray your hat now and let it dry. If using interfacing, wrap the edges of your fabric around the interfacing and sew or glue in place.

5. Attach your decorations over the sewn seam, covering it from view if possible. I sewed mine on, but hot glue or even superglue is also an option if you are not handy with a needle. (I went crazy and put on a veil and a bow and some sparkly bits and feathers)





6. Sew your barrette or comb onto the bottom of the hat.



7. Wear at a jaunty angle and bask in the glow of all the compliments you get!





Wednesday, April 3, 2013

Cage Veil, two simple ways

I love vintage styles, especially hats! I think there is just nothing classier than a lady in a flirty veil, so I recently learned how to make an old-fashioned birdcage veil.

There are two different methods: the band and the gathered puff. Those are not the "official" millinery terms, but it is what I call them in my head. Both ways can be as simple or detailed as you want to make them!

For either method, you need the same basic tools:

  1. Scissors
  2. 1/2-1 yard Millinery or Russian netting (I found it in a half dozen colors at JoAnn's, or you can use any large-weave netting from the bridal and special occasion fabric section. I use both and either look just fine, depending on your own personal tastes)
  3. Thread
  4. Needle
  5. Decorations (like a nice flower or bow)
  6. Bobby pins or a hair comb
  7. Ruler

Band method (done in black 9" millinery)


This method comes out MUCH less puffy, and gives you plenty of options how to wear it.

1. Measure about 18 inches of netting, give or take depending on how far back you want to pin the veil. Try it out in the mirror before cutting.

2. Sew a line straight up each short side, a half an inch from the edge, cinching the netting up as puffy as you want it, and tie off.

3. Sew a bobby pin onto each side and add decorations if you wish. It is that easy!


The Gathered Puff method (done in green large-space netting)

1. Cut a rectangle about 18x24 if using mesh netting. Otherwise, cut 24 inches of millinery.

2. Fold in half.

3. Cut the top corner at an angle, away from the fold. Unfold.
4. Starting in the bottom left corner, sew around, about a half an inch from the edge, until you reach the bottom right corner. Gather the netting as tight as you desire. The tighter the gather, the more poof. Tie off.

5. Sew a hair comb or some bobby pins where the veil is gathered. Add flowers, feathers, or a bow if you wish! See my directions for making fun feather decorations to add here!

These can also be added to hats and hair bands and such for a unique flair - I suggest trying them on mini top hats!